How to avoid Bluetooth interference between headphones and mouse?
I have two Bluetooth devices: Logitech Laser Travel Mouse (probably this one, but white... hope that doesn't matter) and Ritmix RH-432 (sorry for language, but it's apparently Russian company and they don't have English version of site). They are connected to my desktop with ASUS USB-BT21 dongle.
The specifications of these products state:
-
ASUS USB-BT21 (dongle): Bluetooth 2.0 with EDR and A2DP support;
Modulations supported: GFSK (1Mbps), 4-DQPSK (2Mbps), 8-DPSK (3Mbps).
With the integrated Bluetooth dongle of Toshiba NB200 (reported as
0930:0508 Toshiba Corp. Integrated Bluetooth HCI) everything is absolutely identical. I cannot currently do anything with that netbook because southbridge is dead. Ritmix RH-432BTH (headset): Bluetooth 2.0 class 2 with A2DP support.
- Logitech V470 Bluetooth mouse: no technical info on manufacturer's website and on labels.
I use Linux with 2.6.32-24 kernel and bluez 4.60. Each of devices itself connects and works without any troubles.
The problem: when I connect both devices, transmit audio and move mouse, audio stops playing after a second, then, after I stop moving mouse and a 1.5-2 second interval it starts again, chopped, and after another second everything is ok again.
The audio is transmitted through PulseAudio as 44.1KHz 2-channel stream.
There are also some 2.4GHz WiFi networks, but as the problem occurs identically even when there are no networks in kilometers, they probably do not affect it.
Also I can say that when I touch mouse after a bit of idle time it does not begin to move immediately, but only after 200-300ms. So the dongle probably switches to some other kind of signal encoding (modulation, maybe?). This should be related to the very fact of data transfer, not amount, because just a single click produces all these destructive results, too.
upd: this annoys me so badly I have offered a +200 bounty, hope this would help a bit...
upd2: the 'captain obvious' style answers without any explanation aren't really helpful at all; I don't think I want to buy another device with a reason of just "it doesn't work"; and I can make such a decision without external help.
upd3: (after a year, yep) I've experimented a bit with different setups. Looks like recent bluez helps a bit, and mouse from Dell instead of Logitech too, and a noname Chinese "Bluetooth 3.0" dongle is surprisely better than the Asus one... but nevertheless, it does not work in the end. I really should go and try some other headphones.
Old Google Answers Thread:
Some devices can establish many connections at the same time with other devices (like your computer connected to a mobile phone modem, a bluetooth headset, and to another computer - the usb dongle is conected with 3 different devices at the same time). Other devices can only handle one connection at a time. But you can have as many different devices paired (your device "remembers" other devices it has "met") as many persons you can meet - or let's just say, unlimited,
It is quite possible that both just happen to have this limitation. Try going to Best Buy and buy-then-return the most expensive and high-end bluetooth dongle there. If the problem disappears, it's' your bluetooth devices. If not, you can follow another lead or you can take the time-is-money diehard purist approach and buy yourself an RF mouse.
I found the solution to my problem. Devices:
- Laptop: Surface Book 2 i7, Win 10 Pro x64
- Mouse: Logitech MX Anywhere 2
- Earphones: Jaybird X3 & Bose QC35II
When my headphones connected to my cellphone Samsung Note 9 and I connect the Jaybird X3 to the laptop same time using my Logitech mouse my earphones cutting out horribly, every second or two. Then I turned off my Bluetooth on my cellphone and left only two Bluetooth connections on the laptop it is for the mouse and a Jaybird after that my earphones work as intended with no cutting out.
The solution: maybe limit your Bluetooth on your laptop to only two devices, that should help.
I have a few things you can try:
Attempt to get eiither of the devices to work with just 1 of the dongles. If they are flat out incompatible, consider a cheap dongle that supports both.
If that is not possible, attempt to stick one of them on a different channel/bus as the kernel sees it, I could go on about why or how, but it takes a little time to explain. One easy way is to try all combinations of usb ports OR One on the mainboard and one on a USB hub OR get/use a device that does it, such as a PCMCIA / PCCARD. One other device that will use a virtual port is a ETHERNET to USB hub.
One Software Only way is to run a virtualization software (or possibly an OS jail) to pump the signal into a virtual PC which WILL pass over the same physical bus, and possibly the same possibly the same USB stack (depending on the OS/Virtualization software used), but will definitally bypass bluez all together (assuming you forward the USB device, and not the "mouse/headset" directly). After that you can forward the mouse (easier) or headphones (slightly harder) back out to your main PC. The whole thing will use some memory, but if you start out with that in mind, it could be kept low.