How do I install Ubuntu to a USB key? (without using Startup Disk Creator)

If you are hurrying to reply, System → Administration → StartUp Disk Creator -- no, that's not what I'm talking about.

I want to try Ubuntu 11.04's Unity without touching my existing Ubuntu install.

To do this, I need to install the nVidia drivers first (sigh).

To do this, I need changes to persist a reboot.

To do this, I need to really install Ubuntu on a USB key.

How do you do that?

What I tried

1. I tried to make a USB key from Testdrive, then boot from it, then choose "Install Ubuntu." The installer refused to install to the installation media itself.

2. I tried, from my installed copy of Ubuntu:

   sudo kvm /dev/sdb --cdrom .cache/testdrive/iso/ubuntu_natty-desktop-i386.iso
   

   ...but the installer didn't detect the disk properly.

Ubuntu/Linux solution

1. Obtain latest image

You should do this with testdrive .

Note. If your key is smaller than 4.4 GB (for Ubuntu 11.04 (Natty Narwhal)), you must get the alternate installer. The Desktop installer refuses to continue if there is less than 4.4 GB of free disk space.

2. Format the USB disk.

This is important if you already have anything looking like a Linux install on your disk, or the installer will not want to touch that disk, for some reason. I failed earlier because I didn't perform this step, so skip at your own risk! You need a key that is at least 3 GB in size.

You can do so from System → Administration → Disk Utility. Choose the destination USB key, unmount all partitions, and select Format Drive.

You need to make sure you select "Don't Partition" before it lets you format the disk.

3. Start a virtual machine on the USB key

I made sure (with file) that my USB key was in /dev/sdb, then ran:

sudo qemu-system-x86_64 /dev/sdb -cdrom ~/.cache/testdrive/iso/ubuntu_natty-desktop-i386.iso

...to install the i386 ISO of the Natty Narwhal desktop -- the file name will vary if you download a different ISO image.

Details for your virtualization solution of choice will vary, but you want to use the device file of your USB key as the VM's hard drive.

Append -boot order=d to the kvm command to make it boot from the image in case it tries to boot from the 'hard disk' and fails because it cannot find an operating system there.

4. Install normally.

At this point you are working on a virtual machine that sees your USB key as the only connected hard drive. From inside the "QEMU" window, install as you would normally do.

A few notes:

• Partitioning. Avoid using the automatic partitioning system, as it will create a swap partition on your USB key. That's no good, as swapping becomes super slow (seconds-long system freezes slow) and quickly kills your drive's life. Simply allocate a single partition for /. If you're using the alternate installer, make sure you set the noatime flag to further reduce the amount of writes to the disk.

• Updates. Skip the option to automatically download and install updates. It is not guaranteed that the repositories will be in a consistent state by the time you run the installer. Personally, I'd rather manage the upgrades manually with a tool such as aptitude (which does no longer ship with Ubuntu by default).

• Alpha-quality software. Things are a little wonky -- it is alpha quality software, after all. I had dpkg exiting with error code 1 without being able to review the error - no packages were broken as a result, however. I tried to shutdown the virtual machine cleanly after the setup, but it hung. On a reboot, however, the system booted fine.

5. Reboot and boot into your copy of Ubuntu

You may need to fiddle with your BIOS settings to make this work.

A nice (or annoying, based on your use case) thing about Ubuntu on a USB is that next time it'll refresh GRUB, it'll also detect and add to the list the kernels and operative systems on the HDD. This should let you boot straight into your HDD from your USB key's GRUB.

Installing Ubuntu to a removable USB drive with Virtual Box

In order to install Ubuntu to a portable external USB drive (either disk or stick) we may also use Virtual Box to install from a virtual environment. For USB 2.0 support the closed source but free PUEL-version of Virtual Box is needed.

Create a virtual machine for the installation live environment:

We create a virtual machine for a Linux/Ubuntu environment (32- or 64-bit, depending on the installation medium):

As we want to install to an USB drive we do not create a virtual harddisk (VDI) for this machine by unticking the box in the following window:

We then need to assign system memory (e.g. 1024 MB), graphics memory (e.g. 128MB), and adjust CPU settings according to our host hardware. Also we may want to create a bridged network in order to be able to download files during the installation.

Mount the installation CD to the virtual machine:

In the Storage menu from Virtual Box Manager we select the .iso image of our installation CD to mount as CD drive. Make sure the boot order of the virtual machine is set to boot from CD.

Mount the USB drive to the installation environment

After we started the virtual machine (USB support needs to have been set up first) to boot the installation CD we need to mount the USB drive either by clicking on the small icon in the bottom panel or by choosing from Devices -> USB Devices menu of Virtual Box Manager.

^{This is when the USB drive needs to have been mounted before we proceed}

Partition and format the USB drive

After having chosen Something else the graphical partition manager GParted will guide us through the partitioning process:

We need at least a partition with a mount point root (/). In the example above an additional /home partition was created. By unticking Format we keep the data that may already be there. A /swap partition may not be needed for an USB-stick or a portable drive.

• At this point take extra care that the boot loader Grub indeed will be installed to the USB drive (/sda) and not to anywhere else

By selecting Install Now we start the installation to our USB drive. Consider that this installation may take a bit longer than we are used to.

After the installation has finished we may unmount our drive eith the brand new operating system and boot from any other machine to customized it to our needs.

• Do not forget to enable booting from USB in this computer's BIOS.