I need some help understanding the output of journalctl as it relates to system crashing/freezing
I've been getting a lot of freeze-ups and the odd sudden reboot recently. Most often it happens while I am streaming media. The freeze-up infinitely loops that last (approximately) 1 second of audio. I thought I had found and solved it several times but have been wrong every time.
I tried running memtest during the bootup but it freezes at 15%, 30% or 40% depending on the settings I chose. I understand this can and does happen with some BIOS and boards.
I ran SMART and saw a few features marked pre-fail. (I plan to buy a newer drive and clone the contents of the old one onto its replacement when I can afford to).
Following this answer to my question, I ran sudo journalctl -b -1 -e
.
I understand from this question that UFW BLOCK means a connection was blocked. It comes up a lot in the tail end of the output (I redirected the output to a text file).
On these local IP addresses, 254 is my router and 103 is my PC
Aug 27 17:53:44 Hope systemd[1]: Starting Hostname Service...
Aug 27 17:53:44 Hope dbus-daemon[997]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 27 17:53:44 Hope systemd[1]: Started Hostname Service.
Aug 27 17:53:44 Hope hud-service[3437]: void DBusMenuImporter::slotGetLayoutFinished(QDBusPendingCallWatcher*): "No such interface “com.canonical.dbusmenu” on object at path /org/ayatana/bamf/window/65013137"
Aug 27 17:53:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:54:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:54:14 Hope systemd[1]: systemd-hostnamed.service: Succeeded.
Aug 27 17:54:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62508 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:54:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62514 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:55:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:55:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:55:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:56:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:56:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:56:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62554 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:57:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:57:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:57:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62573 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62579 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62589 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62595 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:59:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:59:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62606 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:59:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62613 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:00:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62619 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:00:35 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:30:cd:a7:a8:fd:fc:08:00 SRC=192.168.1.205 DST=192.168.1.103 LEN=267 TOS=0x00 PREC=0x00 TTL=64 ID=92 PROTO=UDP SPT=1900 DPT=42922 LEN=247
Aug 27 18:00:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62635 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62641 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62647 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:02:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:02:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62669 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:02:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:03:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62681 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:03:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Am I looking at the right part of the file?
Is there a crash reason clue here?
Where else might I look?
free -h
total used free shared buff/cache available
Mem: 15Gi 3.5Gi 7.9Gi 377Mi 4.3Gi 11Gi
Swap: 28Gi 0B 28Gi
sysctl vm.swappiness
vm.swappiness = 60
swapon -s
Filename Type Size Used Priority
/dev/sda5 partition 29668348 0 -2
sudo lshw -C memory
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 080015
date: 03/26/2010
size: 64KiB
capacity: 1MiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 256KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies
configuration: level=1
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 1MiB
capabilities: pipeline-burst internal varies
configuration: level=2
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 6MiB
capacity: 6MiB
capabilities: pipeline-burst internal varies
configuration: level=3
*-memory:0
description: System Memory
physical id: 24
slot: System board or motherboard
size: 16GiB
*-bank:0
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 0
serial: 00000000
slot: DIMM0
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 1
serial: 00000000
slot: DIMM1
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:2
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 2
serial: 00000000
slot: DIMM2
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 3
serial: 00000000
slot: DIMM3
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id: 4
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
Further Update: So, I opened up my PC and used Memtest68+ 5.01 from the GRUB menu on each stick of RAM. They all passed. It took a few hours. I'm in no hurry to do that again.
Update top the further update: I also took a look at the UFW BLOCK records and explicitly allowed the more common broadcasts on my network. So those UDP errors are unlikely to be a continuing issue.
Further further update: I sorted out most of those UDP blocks and the last run ended like this:
Sep 03 21:34:42 Hope systemd[1]: Started Run anacron jobs.
Sep 03 21:34:42 Hope systemd[1]: anacron.service: Succeeded.
Sep 03 21:34:42 Hope anacron[19507]: Anacron 2.3 started on 2021-09-03
Sep 03 21:34:42 Hope anacron[19507]: Normal exit (0 jobs run)
Sep 03 21:35:56 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:38:01 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:39:01 Hope CRON[19572]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 03 21:39:01 Hope CRON[19571]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 03 21:39:01 Hope CRON[19573]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi)
Sep 03 21:39:01 Hope CRON[19571]: pam_unix(cron:session): session closed for user root
Sep 03 21:39:01 Hope CRON[19574]: (root) CMD ( [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Sep 03 21:39:01 Hope CRON[19572]: pam_unix(cron:session): session closed for user root
Sep 03 21:39:02 Hope systemd[1]: Starting Clean php session files...
Sep 03 21:39:02 Hope sessionclean[19644]: /usr/lib/php/sessionclean: 35: php7.0: not found
Sep 03 21:39:02 Hope systemd[1]: phpsessionclean.service: Succeeded.
Sep 03 21:39:02 Hope systemd[1]: Finished Clean php session files.
Sep 03 21:40:06 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:42:11 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Update #1:
memtest
freezes when run. Suspect bad RAM, or RAM that needs re-seating in its socket. RAM is in slots DIMM0-3. Remove DIMMs1-3 and retestmemtest
. Ifmemtest
runs without error, add back one DIMM into slot DIMM1 and retest, etc.
Big ol' update (as requested)
free -h
total used free shared buff/cache available
Mem: 15Gi 3.3Gi 5.0Gi 144Mi 7.4Gi 11Gi
Swap: 4.0Gi 0B 4.0Gi
Request grep
# swap was on /dev/sda5 during installation
#UUID=01eaad91-0858-4b01-8cad-76671cf8682d none swap sw 0 0
/swapfile none swap sw 0 0
swapon
Filename Type Size Used Priority
/swapfile file 4194300 0 -2
HDD Screenshots
An updated sudo journalctl -b -1 -e
.
I've solved some of the UDP block reports by allowing them due to being harmless home network broadcasts.
Sep 05 17:25:06 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:27:11 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:29:16 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:30:01 Hope CRON[31486]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 05 17:30:01 Hope CRON[31487]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)
Sep 05 17:30:01 Hope CRON[31486]: pam_unix(cron:session): session closed for user root
Sep 05 17:31:21 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:32:33 Hope systemd[1]: Started Run anacron jobs.
Sep 05 17:32:33 Hope anacron[31544]: Anacron 2.3 started on 2021-09-05
Sep 05 17:32:33 Hope anacron[31544]: Normal exit (0 jobs run)
Sep 05 17:32:33 Hope systemd[1]: anacron.service: Succeeded.
Sep 05 17:33:01 Hope smartd[1067]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 107 to 108
Sep 05 17:33:01 Hope smartd[1067]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Sep 05 17:33:02 Hope smartd[1067]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Sep 05 17:33:26 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
I thought HDD is getting too hot. Turns out those are index values.
memtest
You may have a hardware problem.
Go to https://www.memtest86.com/ and download/run their free memtest
to test your memory. Get at least one complete pass of all the 4/4 tests to confirm good memory. This may take many hours to complete.
swap
Unless you hibernate, your swap partition is way too big. We'll replace it with a 4G /swapfile.
Note: Incorrect use of the rm
and dd
commands can cause data loss. Suggest copy/paste.
In the terminal
...
sudo swapoff -a # turn off swap
sudo rm -i /swapfile # remove old /swapfile
sudo dd if=/dev/zero of=/swapfile bs=1M count=4096
sudo chmod 600 /swapfile # set proper file protections
sudo mkswap /swapfile # init /swapfile
sudo swapon /swapfile # turn on swap
free -h # confirm 16G RAM and 4G swap
Edit /etc/fstab, using sudo -H gedit /etc/fstab
or sudo pico /etc/fstab
.
Confirm this /swapfile line in /etc/fstab... and confirm no other “swap” lines... use SPACES in this line... confirm NO TABS...
/swapfile none swap sw 0 0
Note: Remove other existing swap lines. Use gparted
to delete /dev/sda5.
reboot # reboot and verify operation
Update #1:
memtest
freezes when run. Suspect bad RAM, or RAM that needs re-seating in its socket. RAM is in slots DIMM0-3. Remove DIMMs1-3 and retest memtest
. If memtest
runs without error, add back one DIMM into slot DIMM1 and retest, etc.
Update #2:
It looks like your sdc drive has one or more bad blocks. Let's map it out...
Note: do NOT abort a bad block scan!
Note: do NOT bad block a SSD
Note: backup your important files FIRST!
Note: this will take many hours
Note: you may have a pending HDD failure
Boot to a Ubuntu Live DVD/USB in “Try Ubuntu” mode.
In terminal
...
sudo fdisk -l
# identify all "Linux Filesystem" partitions
sudo e2fsck -fcky /dev/sdXX
# read-only test
or
sudo e2fsck -fccky /dev/sdXX
# non-destructive read/write test (recommended)
The -k is important, because it saves the previous bad block table, and adds any new bad blocks to that table. Without -k, you loose all of the prior bad block information.
The -fccky parameter...
-f Force checking even if the file system seems clean.
-c This option causes e2fsck to use badblocks(8) program to do
a read-only scan of the device in order to find any bad blocks.
If any bad blocks are found, they are added to the bad block
inode to prevent them from being allocated to a file or direc‐
tory. If this option is specified twice, then the bad block scan
will be done using a non-destructive read-write test.
-k When combined with the -c option, any existing bad blocks in the
bad blocks list are preserved, and any new bad blocks found by
running badblocks(8) will be added to the existing bad blocks
list.
-y Assume an answer of `yes' to all questions; allows e2fsck to be
used non-interactively. This option may not be specified at the
same time as the -n or -p options.
Update #3:
Since deleting /dev/sda5, you're left with a 28G unallocated hole on your HDD. You can add that space to /dev/sda1.
Make sure that you have a good backup of your important Ubuntu files, as this procedure can corrupt or lose data.
Keep these things in mind:
-
always start the entire procedure with issuing a swapoff on any mounted swap partitions, and end the entire procedure with issuing a swapon on that same swap partition
-
a move is done by pointing the mouse pointer at the center of a partition and dragging it left/right with the hand cursor
-
a resize is done by dragging the left/right side of a partition to the left/right with the directional arrow cursor
-
if any partition can't be moved/resized graphically, you may have to manually enter the specific required numeric data (don't do this unless I instruct you to)
-
you begin any move/resize by right-clicking on the partition in the lower pane of the main window, and selecting the desired action from the popup menu, then finishing that action in the new move/resize window
Do the following...
Note: if the procedure doesn't work exactly as I outline, STOP immediately and DO NOT continue.
- boot to a Ubuntu Live DVD/USB, in “Try Ubuntu” mode
- start
gparted
- Delete /dev/sda2 extended partition
- Resize the right side of /dev/sda1 all the way to the right
- click the Apply icon