Cannot see computers on network
I have three Windows 10 machines on a network, on the same default network: WORKGROUP.
One of them can see all three, call it Media-PC. The other two can only see each other but not Media-PC, call them desktop-1 & desktop-2.
I have turned on the following services, DNS Client, Function Discovery, SSDP Discovery & UPnP Service.
Network discovery is running on all three machines. I can ping all three computers from each other.
I cannot figure out why desktop-1 & 2 can't see Media-PC.
Media-PC can see them but they can only see each other.
Hope someone can help me with this.
Solution 1:
Network discovery has since always been a painful subject in all versions of Windows, especially now when so many security fixes were applied.
I have collected below all the fixes I know. You might try them one by one, undoing the ones which do not help.
Homogenous account types
All the computers must be logged-on with the same type of account. Meaning that all must have a Microsoft account or a local account, as mixing account types will not work.
If you change an account type that has created some network shares, they should be deleted and recreated.
Network Reset
In PC Settings, Network & Internet Settings, click Network Reset and in the next screen click Reset now.
This will reset all network settings, so you may have to recreate any defined VPNs and re-enable settings such as Network Discovery.
Computer Browser service broken
As described in the Microsoft article SMBv1 is not installed by default in Windows 10 Fall Creators Update 2017 and Windows Server, Semi-annual Channel says :
The Computer Browser service relies on the SMBv1 protocol to populate the Windows Explorer Network node (also known as "Network Neighborhood"). This legacy protocol is long deprecated, doesn't route, and has limited security. Because the service cannot function without SMBv1, it is removed at the same time.
However, if you still have to use the Explorer Network in home and small business workgroup environments to locate Windows-based computers, you can follow these steps on your Windows-based computers that no longer use SMBv1:
- Start the "Function Discovery Provider Host" and "Function Discovery Resource Publication" services, and then set them to Automatic (Delayed Start).
- When you open Explorer Network, enable network discovery when you are prompted.
All Windows devices within that subnet that have these settings will now appear in Network for browsing. This uses the WS-DISCOVERY protocol. Contact your other vendors and manufacturers if their devices still don't appear in this browse list after the Windows devices appear. It is possible they have this protocol disabled or that they support only SMBv1.
If this does not help, you may enable SMB 1.0/CIFS File in Programs and Features -> Turn Windows features on or off. Enable both the SMB 1.0/CIFS Client and Server. The disadvantage is that you will be vulnerable to viruses that exploit SMB v1.0 vulnerabilities such as Wanna Cry, although one of your computers must first be infected for the virus to propagate to the others using this vulnerability.
Re-check network Discovery
In an elevated Command Prompt run
netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes
Required Windows services
In the Services console, ensure the following services have a Startup type of "Automatic" and status is "Running".
- Function Discovery Provider Host - Automatic (Delayed Start)
- Function Discovery Resource Publication - Automatic (Delayed Start)
- DNS Client - Automatic
- SSDP Discovery - Automatic
- UPnP Device Host - Automatic (if you use UPnP)
Missing master browser computer
Use regedit on the computer you wish to always be the master browser, and navigate to the registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters
Change the value of MaintainServerList from Auto to Yes.
If it is missing, add a new String Value IsDomainMaster and set it to True.
You may need to reboot to activate this.
For more information see Specifying Browser Computers.
Add credentials for other computers
If you cannot see shares created by other computers, you may need to add reciprocal credentials to both computers.
Go to Control Panel, User Accounts, Manager your credentials, and click on Windows Credentials. Now click on Add a Windows Credential.
Add all your users as follows :
- Internet or network address: The name of the other computer
- User name: Other computer name or Microsoft account email address
- Password: other computer's logon password
Press OK to save. A Network Reset might be required.
Check sharing options for your network profile
In Control Panel -> Network and Sharing Center -> Change advanced sharing settings, ensure that all "Turn On ..." and "Allow ..." options are checked for your type of profile (normally Private).
Rebind all network adapters
For hard problems, uninstalling all network adapters in the Device Manager and reboot may help. After the reboot, Windows 10 automatically re-installs the network adapters.
Solution 2:
- Make sure all of the three computers are on the same network IP.
- Make sure all of the three computers have the same subnet mask IP.
- Make sure to check the local IP address of the three computers using ipconfig
Make sure you have everything needed enabled inside Control Panel.
- Open Control Panel
- Choose "Network and Internet"
- Choose "Network and Sharing Center"
- Change adapter settings
- Right click on your network adapter and choose "Properties"
- Check the both Link-Layer Topology Discovery extensions
After finishing that, you should be able to discover all of the three PC's from any one of them. If not, try restarting the PC. Good luck!
sincerely,
Nurudin Imširović