Redirect System.out and System.err to slf4j
I needed to redirect System.out/err.println outputs to slf4j.
I know that this is not the way to do logging properly but there is an external library, which logs to System.out
Solution 1:
You can use sysout-over-slf4j.
The sysout-over-slf4j module allows a user to redirect all calls to System.out and System.err to an SLF4J defined logger with the name of the fully qualified class in which the System.out.println (or similar) call was made, at configurable levels.
If you are not using Maven, download the jar and add it to your classpath.
Alternatively, add it as a Maven dependency:
<dependency>
<groupId>uk.org.lidalia</groupId>
<artifactId>sysout-over-slf4j</artifactId>
<version>1.0.2</version>
</dependency>
Then at application startup, call:
SysOutOverSLF4J.sendSystemOutAndErrToSLF4J();
Solution 2:
I solved the problem by using the LoggingOutputStream for log4j and modified it a little bit for slf4j.
import java.io.IOException;
import java.io.PrintStream;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
public class SysStreamsLogger {
private static Logger sysOutLogger = LoggerFactory.getLogger("SYSOUT");
private static Logger sysErrLogger = LoggerFactory.getLogger("SYSERR");
public static final PrintStream sysout = System.out;
public static final PrintStream syserr = System.err;
protected static final String LINE_SEPERATOR = System.getProperty("line.separator");
public static void bindSystemStreams() {
// Enable autoflush
System.setOut(new PrintStream(new LoggingOutputStream(sysOutLogger, false), true));
System.setErr(new PrintStream(new LoggingOutputStream(sysErrLogger, true), true));
}
public static void unbindSystemStreams() {
System.setOut(sysout);
System.setErr(syserr);
}
private static class LoggingOutputStream extends java.io.OutputStream {
protected Logger log;
protected boolean isError;
/**
* Used to maintain the contract of {@link #close()}.
*/
protected boolean hasBeenClosed = false;
/**
* The internal buffer where data is stored.
*/
protected byte[] buf;
/**
* The number of valid bytes in the buffer. This value is always in the
* range <tt>0</tt> through <tt>buf.length</tt>; elements
* <tt>buf[0]</tt> through <tt>buf[count-1]</tt> contain valid byte
* data.
*/
protected int count;
/**
* Remembers the size of the buffer for speed.
*/
private int bufLength;
/**
* The default number of bytes in the buffer. =2048
*/
public static final int DEFAULT_BUFFER_LENGTH = 2048;
private LoggingOutputStream() {
// illegal
}
/**
* Creates the LoggingOutputStream to flush to the given Category.
*
* @param log
* the Logger to write to
*
* @param isError
* the if true write to error, else info
*
* @exception IllegalArgumentException
* if cat == null or priority == null
*/
public LoggingOutputStream(Logger log, boolean isError) throws IllegalArgumentException {
if (log == null) {
throw new IllegalArgumentException("log == null");
}
this.isError = isError;
this.log = log;
bufLength = DEFAULT_BUFFER_LENGTH;
buf = new byte[DEFAULT_BUFFER_LENGTH];
count = 0;
}
/**
* Closes this output stream and releases any system resources
* associated with this stream. The general contract of
* <code>close</code> is that it closes the output stream. A closed
* stream cannot perform output operations and cannot be reopened.
*/
@Override
public void close() {
flush();
hasBeenClosed = true;
}
/**
* Writes the specified byte to this output stream. The general contract
* for <code>write</code> is that one byte is written to the output
* stream. The byte to be written is the eight low-order bits of the
* argument <code>b</code>. The 24 high-order bits of <code>b</code> are
* ignored.
*
* @param b
* the <code>byte</code> to write
*/
@Override
public void write(final int b) throws IOException {
if (hasBeenClosed) {
throw new IOException("The stream has been closed.");
}
// don't log nulls
if (b == 0) {
return;
}
// would this be writing past the buffer?
if (count == bufLength) {
// grow the buffer
final int newBufLength = bufLength + DEFAULT_BUFFER_LENGTH;
final byte[] newBuf = new byte[newBufLength];
System.arraycopy(buf, 0, newBuf, 0, bufLength);
buf = newBuf;
bufLength = newBufLength;
}
buf[count] = (byte) b;
count++;
}
/**
* Flushes this output stream and forces any buffered output bytes to be
* written out. The general contract of <code>flush</code> is that
* calling it is an indication that, if any bytes previously written
* have been buffered by the implementation of the output stream, such
* bytes should immediately be written to their intended destination.
*/
@Override
public void flush() {
if (count == 0) {
return;
}
// don't print out blank lines; flushing from PrintStream puts out
// these
if (count == LINE_SEPERATOR.length()) {
if (((char) buf[0]) == LINE_SEPERATOR.charAt(0) && ((count == 1) || // <-
// Unix
// &
// Mac,
// ->
// Windows
((count == 2) && ((char) buf[1]) == LINE_SEPERATOR.charAt(1)))) {
reset();
return;
}
}
final byte[] theBytes = new byte[count];
System.arraycopy(buf, 0, theBytes, 0, count);
if (isError) {
log.error(new String(theBytes));
} else {
log.info(new String(theBytes));
}
reset();
}
private void reset() {
// not resetting the buffer -- assuming that if it grew that it
// will likely grow similarly again
count = 0;
}
}
}
Now it's possible to redirect Sytem.out/err by calling SysStreamsLogger.bindSystemStreams() at the begining of your application.
Logging Output looks like this (from OpenEJB startup)
2012-06-27 13:44:12,792 INFO [main:] SYSOUT:181 - Apache OpenEJB 3.1.4 build: 20101112-03:32
2012-06-27 13:44:12,793 INFO [main:] SYSOUT:181 - http://openejb.apache.org/