UUID format: 8-4-4-4-12 - Why?
Why are UUID's presented in the format "8-4-4-4-12" (digits)? I've had a look around for the reason but can't find the decision that calls for it.
Example of UUID formatted as hex string: 58D5E212-165B-4CA0-909B-C86B9CEE0111
It's separated by time, version, clock_seq_hi, clock_seq_lo, node
, as indicated in the following rfc.
From the IETF RFC4122:
4.1.2. Layout and Byte Order
To minimize confusion about bit assignments within octets, the UUID
record definition is defined only in terms of fields that are
integral numbers of octets. The fields are presented with the most
significant one first.
Field Data Type Octet Note
#
time_low unsigned 32 0-3 The low field of the
bit integer timestamp
time_mid unsigned 16 4-5 The middle field of the
bit integer timestamp
time_hi_and_version unsigned 16 6-7 The high field of the
bit integer timestamp multiplexed
with the version number
clock_seq_hi_and_rese unsigned 8 8 The high field of the
rved bit integer clock sequence
multiplexed with the
variant
clock_seq_low unsigned 8 9 The low field of the
bit integer clock sequence
node unsigned 48 10-15 The spatially unique
bit integer node identifier
In the absence of explicit application or presentation protocol
specification to the contrary, a UUID is encoded as a 128-bit object,
as follows:
The fields are encoded as 16 octets, with the sizes and order of the
fields defined above, and with each field encoded with the Most
Significant Byte first (known as network byte order). Note that the
field names, particularly for multiplexed fields, follow historical
practice.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time_low |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time_mid | time_hi_and_version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|clk_seq_hi_res | clk_seq_low | node (0-1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| node (2-5) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The format is defined in IETF RFC4122 in section 3. The output format is defined where it says "UUID = ..."
3.- Namespace Registration Template
Namespace ID: UUID Registration Information: Registration date: 2003-10-01
Declared registrant of the namespace: JTC 1/SC6 (ASN.1 Rapporteur Group)
Declaration of syntactic structure: A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. Since a UUID is a fixed size and contains a time field, it is possible for values to rollover (around A.D. 3400, depending on the specific algorithm used). A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network.
The internal representation of a UUID is a specific sequence of bits in memory, as described in Section 4. To accurately represent a UUID as a URN, it is necessary to convert the bit sequence to a string representation. Each field is treated as an integer and has its value printed as a zero-filled hexadecimal digit string with the most significant digit first. The hexadecimal values "a" through "f" are output as lower case characters and are case insensitive on input. The formal definition of the UUID string representation is provided by the following ABNF [7]: UUID = time-low "-" time-mid "-" time-high-and-version "-" clock-seq-and-reserved clock-seq-low "-" node time-low = 4hexOctet time-mid = 2hexOctet time-high-and-version = 2hexOctet clock-seq-and-reserved = hexOctet clock-seq-low = hexOctet node = 6hexOctet hexOctet = hexDigit hexDigit hexDigit = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" / "a" / "b" / "c" / "d" / "e" / "f" / "A" / "B" / "C" / "D" / "E" / "F"
128 bits
The "8-4-4-4-12" format is just for reading by humans. The UUID is really a 128-bit number.
Consider the string format requires the double of the bytes than the 128 bit number when stored or in memory. I would suggest to use the number internally and when it needs to be shown on a UI or exported in a file, use the string format.