Serious screen flickering when WiFi is on (Dell XPS 15)

Solution is i915.edp_vswing=2 kernel parameter

Although OP has solved the problem thanks to Arch Linux link in next section questions still remain about what it means.

From announcement: Display Port Presentation December 2010:

• Embedded DisplayPort (eDP) was developed to be used specifically in embedded display applications

  • Notebook, Netbook, and Notepad PCs
  • All-in-One PCs

• It is designed to replay LVDS technology

As many people here already know, i915 is Intel's display driver for Linux that has been around for decades.

The vswing component I cannot fathom but, you can find the C code that controls it here: https://patchwork.kernel.org/patch/6349211/

The parameter settings (after = sign) can be:

• 0=default, to do nothing
• 1=not sure, haven't found answer yet
• 2=control flicker, which OP used

I will set my kernel parameter to 1 and reboot after posting this answer.

This is a temporary setting for older kernels according to what I read tonight. So you should occasionally remove the setting after new kernels are installed to see if it's still necessary.

Finally there is an interesting tidbit here: https://patchwork.kernel.org/patch/9303023/

>   /*
> -  * FIXME On Dell XPS 13 9350 the OpRegion panel type (0) gives us
> -  * low vswing for eDP, whereas the VBT panel type (2) gives us normal
> -  * vswing instead. Low vswing results in some display flickers, so
> -  * let's simply ignore the OpRegion panel type on SKL for now.
> +  * FIXME On Dell XPS 13 9350 and Dell XPS 13 L322X the
> +  * OpRegion panel type (0) gives us low vswing for eDP,
> +  * whereas the VBT panel type (2) gives us normal vswing
> +  * instead. Low vswing results in some display flickers, so
> +  * let's simply ignore the OpRegion panel type on SKL and
> +  * IVYBRIDGE for now.
>    */

Original post that helped OP stumble on solution

Here is a great link for you: Arch Linux Dell XPS 13 (9350):

Content adaptive brightness control

In the XPS 13 the display panels (both FHD and QHD+) come with adaptive brightness embedded in the panel firmware, this "content adaptive brightness control" (usually referred to as CABC or DBC) will adjust the screen brightness depending on the content displayed on the screen and will generally be found undesirable, especially for Linux users who are likely to be switching between dark and light screen content. Dell has issued a fix for this however it is only available to run in Windows and for the QHD+ model of the laptop so this precaution should be taken before installing Linux, the FHD model of the XPS 13 (9350) cannot be fixed. This is not a problem with the panel but rather a problem with the way the panels are configured for the XPS 13, as the same panel exists in the Dell's Latitude 13 7000 series (e7370) FHD model but with CABC disabled. The fix is available directly from Dell.

Additionally check these posts from other Dell users:

• https://www.dell.com/community/Laptops-General/XPS-15-9530-screen-flicker/td-p/4360533/page/2
• Disable Panel Self-Refresh (Windows instructions need to find Linux)