How to install a specific package version in Alpine?

You can set "sticky" versions like this:

# Both are equal
apk add packagename=1.2.3-suffix
apk add 'packagename<1.2.3-suffix'

That will upgrade packages only until the specified version. You can then safely use …

apk upgrade

to upgrade all packages, while packages with versions will remain with their version. To set a minimum version just use …

apk add "packagename>1.2.3-suffix"

In case you can't find a package, while you can see it in the UI for Alpine packages, update your sources/package database:

apk update

The package repository can be found here:

https://pkgs.alpinelinux.org/packages

Never pin packages from the "edge" branch of the alpine package repo, as these are in test and may be revoked. (At pkgs.alpinelinux.org/packages, click "edge" and change it to the alpine image version you use, and click "search" again.)

Additional info by cowlinator

Pinning a package to an exact version carries the risk that the package will be dropped from the repo, and your Dockerfile will fail to build in the future. The official recommendation can be read here, citation below.

Alternately, you could simply set a minimum package version instead of an exact version.

We don't at the moment have resources to store all built packages indefinitely in our infra. Thus we currently keep only the latest for each stable branch, and has always been like that.

…

There has been discussion of keep all packages tagged as Alpine in the future. However, this is still "in-progress". The official recommendation is to keep your own mirror / repository with all the specific package and their versions that you may want to use.

— Timo Teräs, @fabled (Alpine)

The complete Alpine Linux organisations repositories can be found on this self hosted GitLab instance.

Currently, there is no way to install arbitrary older versions of a package from official repositories in Alpine Linux. The best thing you can achieve is using repositories of the earlier releases:

# cat /etc/alpine-release
3.3.3

# echo 'http://dl-cdn.alpinelinux.org/alpine/v3.2/main' >> /etc/apk/repositories

# apk update
fetch http://dl-cdn.alpinelinux.org/alpine/v3.3/community/x86_64/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/v3.3/main/x86_64/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/v3.2/main/x86_64/APKINDEX.tar.gz

# apk add bash==4.3.33-r0
(1/1) Updating pinning bash (4.3.33-r0)
OK: 13 MiB in 17 packages

# apk add bash==4.3.42-r3
(1/2) Upgrading bash (4.3.33-r0 -> 4.3.42-r3)
Executing bash-4.3.42-r3.post-upgrade
(2/2) Purging ncurses5-libs (5.9-r1)
Executing busybox-1.24.1-r7.trigger
OK: 13 MiB in 16 packages

The syntax for pinning alpine packages with apk is apk add packageName=x.y.z.

To set a minimum version, use apk add packageName>x.y.z

Example:

FROM alpine:3.3
RUN apk update && apk upgrade
RUN apk add --no-cache \
  git=2.8.6-r0 \
  bash=4.3.42-r6 \
  python3=3.5.1-r0

However, the official Alpine package repo can drop any package version from any branch. This means that if you pin your package to an exact version in your Dockerfile, your Dockerfile may not work in the future.

The official recommendation for pinning exact package versions is to keep your own mirror / repository with all the specific package and their versions that you may want to use.

Alternately, you could use a minimum package version instead of a exact pinned package version.

Vlad Frolov already gave the answer. I am writing the docker solution. I was trying to add some package from the v3.8 repository.

• Browse the old archive http://dl-cdn.alpinelinux.org/alpine/ and get the specific repository version of your software.
• After getting the repository version, add the version on your docker file

• Specify exact version of your package from the repository

  RUN echo 'http://dl-cdn.alpinelinux.org/alpine/v3.8/main' >> /etc/apk/repositories
  RUN apk update
  RUN apk --no-cache add ca-certificates=20190108-r0 gettext=0.19.8.1-r2 postfix=3.3.0-r4 rsyslog=8.34.0-r1 libsasl=2.1.26-r15
  

Because I was using the testing repo. I ended up building my own copy. Steps:

Go to package details. Ex:

https://pkgs.alpinelinux.org/package/edge/testing/armhf/watchman

Click on the commit, click on the APKBUILD file links and "Log" on the menu to get the commit log of the APKBUILD file. Then choose a commit for your APKBUILD file and download it. Ex:

https://git.alpinelinux.org/cgit/aports/tree/testing/watchman/APKBUILD?id=63f5e7d295659a855709901ce22a3e5f40fce455

Install the build tools:

apk -U add alpine-sdk

You need to be not root user so create a packager user with password:

adduser -D packager && addgroup packager abuild
passwd packager

Then build it as packager in the same directory as the APKBUILD file:

su - packager
abuild-keygen -a -i
abuild -r

You might need to figure out errors and install dependencies. In my example, I needed to do this on my existing Docker image as root:

apk add python-dev

After a successful build as packager, install it as root:

apk add /home/packager/packages/<something...>/watchman-4.7.0-r0.apk --allow-untrusted

Not sure how to remove the --allow-untrusted part, but the steps worked for me.