Create a bootable Windows 10 USB drive (UEFI) from Linux

Solution 1:

You did all right. Make gpt table with fat32 and copy all data from iso on it. But you also need to set flag "msftdata"(not "boot") on this partition with e.g. parted.

Solution 2:

Windows 10 October 2018 release UEFI bootable USB drive on any Linux distribution.

Notice, that since Windows 10 October 2018 release the installation file sources/install.wim is larger than the maximum FAT32 file size, so we will format USB drive to NTFS. Windows installer also cannot work with an EFI partition (code ef00), so we will use Microsoft basic data partition type (code 0700).

Variant A (For PCs with NTFS support)

Steps for creating USB drive with name /dev/sdc (Replace all commands with YOUR device name!):

Insert USB drive to computer and make sure it is unmounted. Some distributions like to automount USB drives, so make sure you unmount them. Mounted partitions can be found with mount -l | grep '/dev/sdc', then unmount with sudo umount /dev/sdcX (where X is partition number).
Open USB block device using gdisk /dev/sdc, configure it as GPT and create Microsoft basic data partition (code 0700), then write changes and quit (Next steps will destroy partition table in your USB drive!!!).

sudo gdisk /dev/sdc
o
> This option deletes all partitions and creates a new protective MBR.
> Proceed? (Y/N): y
n
> Partition number ... > hit Enter
> First sector ... : > hit Enter
> Last sector ... : > hit Enter
> Current type is 'Linux filesystem'
> Hex code or GUID (L to show codes, Enter = 8300): 0700
p
> Should print something like:
> Disk /dev/sdc: 15646720 sectors, 7.5 GiB
> Model: DataTraveler 160
> Sector size (logical/physical): 512/512 bytes
> Disk identifier (GUID): ...
> Partition table holds up to 128 entries
> Main partition table begins at sector 2 and ends at sector 33
> First usable sector is 34, last usable sector is 15646686
> Partitions will be aligned on 2048-sector boundaries
> Total free space is 2014 sectors (1007.0 KiB)
> Number  Start (sector)    End (sector)  Size       Code  Name
>    1            2048        15646686   7.5 GiB     0700  Microsoft basic data
w
> Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!
> Do you want to proceed? (Y/N): y
q

Format new partition as NTFS (thx @Alex for -Q idea):

sudo mkfs.ntfs -Q /dev/sdc1

Mount new USB partition to temporary directory in your home:

mkdir ~/tmp-win10-usb-drive
sudo mount /dev/sdc1 ~/tmp-win10-usb-drive

Download Windows installation ISO, create new temporary directory in your home and mount it there:

mkdir ~/tmp-win10-iso-mnt
sudo mount Win10_1809Oct_English_x64.iso ~/tmp-win10-iso-mnt

Copy all files from mounted ISO to USB drive (you can use rsync to see progress):

sudo cp -rT ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/

Unmount Windows ISO and USB drive and remove temporary directories:

sudo umount ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/
rmdir ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/

Insert USB drive to new computer and boot from it.

Variant B (For PCs without NTFS support)

Steps for creating USB drive with name /dev/sdc (Replace all commands with YOUR device name!):

Insert USB drive to computer and make sure it is unmounted. Some distributions like to automount USB drives, so make sure you unmount them. Mounted partitions can be found with mount -l | grep '/dev/sdc', then unmount with sudo umount /dev/sdcX (where X is partition number).
Open USB block device using gdisk /dev/sdc
Configure it as GPT
Create first partition of 1GB size and type Microsoft basic data (code 0700).
Create second partition of rest of the size and type Microsoft basic data (code 0700).
Write changes and quit (Next steps will destroy partition table in your USB drive!!!).

sudo gdisk /dev/sdc
> o
> This option deletes all partitions and creates a new protective MBR.
> Proceed? (Y/N): y
> n
> Partition Number: Enter
> First sector: Enter
> Last sector: 1G
> Type: 0700
> n
> Partition Number: Enter
> First sector: Enter
> Last sector: Enter
> Type: 0700
> p
# Should print something like:
> Disk /dev/sdc: 30031250 sectors, 14.3 GiB
> Model: Ultra USB 3.0   
> Sector size (logical/physical): 512/512 bytes
> Disk identifier (GUID): C657C0AF-3FE2-4152-8BF1-CE3CCA9F3541
> Partition table holds up to 128 entries
> Main partition table begins at sector 2 and ends at sector 33
> First usable sector is 34, last usable sector is 30031216
> Partitions will be aligned on 2048-sector boundaries
> Total free space is 4061 sectors (2.0 MiB)

> Number  Start (sector)    End (sector)  Size       Code  Name
>    1            2048         2048000   999.0 MiB   0700  Microsoft basic data
>    2         2050048        30031216   13.3 GiB    0700  Microsoft basic data

w
> Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!
> Do you want to proceed? (Y/N): y
q

Format first partition as FAT32 and second as NTFS:

sudo mkfs.fat -F32 /dev/sdc1
sudo mkfs.ntfs -Q  /dev/sdc2

Mount new USB partitions to temporary directories in your home:

mkdir ~/tmp-win10-fat-usb-drive
mkdir ~/tmp-win10-ntfs-usb-drive
sudo mount /dev/sdc1 ~/tmp-win10-fat-usb-drive
sudo mount /dev/sdc2 ~/tmp-win10-ntfs-usb-drive

Download Windows installation ISO, create new temporary directory in your home and mount it there:

mkdir ~/tmp-win10-iso-mnt
sudo mount Win10_1809Oct_English_x64.iso ~/tmp-win10-iso-mnt

Copy following files with from mounted ISO to FAT32 formatted USB drive (basically copy everything besides sources/ but include sources/boot.wim):

sudo cp ~/tmp-win10-iso-mnt/* ~/tmp-win10-fat-usb-drive/
sudo cp -r ~/tmp-win10-iso-mnt/boot ~/tmp-win10-fat-usb-drive/
sudo cp -r ~/tmp-win10-iso-mnt/efi ~/tmp-win10-fat-usb-drive/
sudo cp -r ~/tmp-win10-iso-mnt/support ~/tmp-win10-fat-usb-drive/
sudo mkdir ~/tmp-win10-iso-mnt/sources ~/tmp-win10-fat-usb-drive/
sudo cp ~/tmp-win10-iso-mnt/sources/boot.wim ~/tmp-win10-fat-usb-drive/sources

Copy everything from mounted ISO to NTFS formatted USB drive:

sudo cp -rT ~/tmp-win10-iso-mnt/ ~/tmp-win10-ntfs-usb-drive/

Unmount Windows ISO and both USB partitions and remove temporary directories:

sudo umount ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-fat-drive/ ~/tmp-win10-usb-ntfs-drive/
rmdir ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/

Insert USB drive to new computer and boot from it.

Solution 3:

I've used woeusb on Ubuntu the following way (Warning: this will overwrite your whole partition table!):

sudo woeusb --tgt-fs NTFS --device Win10_1809Oct_Hungarian_x64.iso /dev/sdc

If you encounter this error message:

Partition is still detected after wiping all signatures, this indicates that the drive might be locked into readonly mode due to end of lifespan.

do the following: sudo fdisk /dev/sdc, and choose d and then finally w.

(Source: https://github.com/slacka/WoeUSB/issues/219.) After this, try again to run the above command.

Anyway, with this method woeusb created a gpt partition table with two partitions:

partition      file system    label          size          flags
----------------------------------------------------------------
/dev/sdc1      nfts           Windows USB     57.00 GiB
/dev/sdc2      fat16          UEFI_NTFS      512.00 KiB    lba
unallocated                                    4.00 MiB

Finally, all I had to do is to put the boot flag with gparted for the /dev/sdc2 partition (alongside lba).

This way, I could sucessfully boot in UEFI mode and install Windows 10 from my USB stick.

Solution 4:

I did some search, and found a perfect script: windows2usb.

Since woeusb doesn't support UEFI, this tool supports BIOS and UEFI(with rufus driver), FAT32 and NTFS.

Update: If the NTFS driver in windows2usb fails for you, you may also try ventoy. It's easier to use if you have multiple OS images in one USB stick.